供水管道标识桩常见印字

Common printing of water supply pipeline identification pile

给水管道标识桩桩体常见为印制管道方LOGO及电话，字体一样平常印制”给水管道、严禁开挖“、”下有自来水管道、严禁开挖“、”供水管道、严禁开挖“、”下有供水管道、严禁开挖“

The water supply pipeline identification pile is usually printed with the logo and telephone of the pipeline owner, and the font is generally printed with "water supply pipeline, no excavation", "water supply pipeline, no excavation", "water supply pipeline, no excavation", "water supply pipeline, no excavation", "water supply pipeline, no excavation", and no excavation“

供水管道标识桩设置规范

Code for setting of water supply pipeline marker posts

高压和超高压管道（P＞1.6MPa）必需设置标识桩
。其他压力级制管道可设置标识桩
。标识桩宜接纳塑料或其他非金属切合质料
。标识桩设置的位置和间距应切合下列划定：

High pressure and ultra-high pressure pipelines (P ＞ 1.6Mpa) must be provided with identification piles. Other pressure grade pipelines can be provided with identification piles. Identification piles should be made of plastic or other non-metallic materials. The location and spacing of marker posts shall meet the following requirements:

标识桩应装置在管道的正上方，当标识桩用作转角桩时，应装置在转角段中点的正上方
。当管道正上方没有装置条件时，可设置在相对距离教近的路边绿化带内，并在标识桩上标明管桩
。

The identification pile shall be installed directly above the pipe. When the identification pile is used as a corner pile, it shall be installed directly above the midpoint of the corner section. When there is no installation condition directly above the pipeline, it can be set in the roadside green belt relatively close to the church, and the pipe pile shall be marked on the identification pile.

全关闭禁入蹊径不得设置标识桩
。

No sign post shall be set on the completely closed road.

标识桩的装置间距宜为100m.地面平展、视碍少、管蹊径由顺直的情形，标识桩的装置间距可大于100m.特殊地段，事故多发地段可以缩短装置间距
。

The installation spacing of identification piles should be 100m If the ground is flat, there are few visual obstacles and the pipeline route is straight, the installation spacing of identification piles can be greater than 100m In special sections and accident prone sections, the installation spacing can be shortened.

标识桩的正面应包括警示用语并面向蹊径
。

The front of the sign pile shall contain warning words and face the road.

标识桩的形状应切合下列划定：

The shape of the identification pile shall meet the following requirements:

高压和超高压管道标识桩应为立方体，由桩和桩帽组成
。

High pressure and ultra-high pressure pipe identification piles shall be cubes consisting of piles and pile caps.

其他压力级制管道标识桩应为三角形柱体
。

Other pressure class pipe identification piles shall be triangular columns.

标识桩的尺寸可按以下划定选取
。立方体标识桩的尺寸为150mm×150mm×1000mm.等边三角形柱体标识桩的尺寸为b×h:150mm×1000mm.

The size of identification pile can be selected according to the following provisions. The size of the cube marker post is 150mm × 150mm × 1000mm. The dimension of the equilateral triangle column identification pile is b × h:150mm × 1000mm.

标识桩的内容必需包括管道权属单位名称、警示用语、联系电话
。

The contents of the identification pile must include the name of the pipeline ownership unit, warning words and contact number.

供水标识桩的内容可包括标识桩编号、压力管道使用挂号编号、管道区域名称、企业标识等
。

The contents of water supply identification pile may include identification pile number, pressure pipe use registration number, pipeline area name, enterprise identification, etc.

更多关于供水标识桩的信息您可以关注我们网站获取获得！

For more information about water supply marker posts, you can follow our website Get get!